How to Make Dorothy's Ruby Slippers

So you want to be dress up as Dorothy from Wizard of Oz? That's easy! All you need is a white blouse, a blue dress and Toto. But what about the ruby slippers? If sparkly shoes are not in this season, you can make a pair yourself with just a little patience and a lot of glitter.

The original ruby slippers made for Judy Garland in the Wizard of Oz (1939) were dyed red and then covered with organza, decorated with burgundy sequins, and then two bejeweled red leather bows were added.

The original ruby slippers via Smithsonian National Museum        

Since sewing sequin is pretty time consuming, simple glitter would do the trick. 

You will need:
- a pair of pumps or ballet flats (if they are red, that's a plus)
- loose glitter
- craft glue or Mod Podge
- glitter glue
- a few paint brushes you're not too attached to
- hairspray
- disposable cups
- a stiff red ribbon
- a glue gun
- scissors
- red rhinestones in different sizes
- needle and thread

STEP 1
Clear a working space for yourself and make sure to cover it with cooking parchment or some disposable paper. Glitter has a tendency to get everywhere. I made these shoes a week ago and there's still bits of glitter I find in my bedroom and on my balcony.

STEP 2
Fill one disposable cup with a bit of glue and the other one with loose glitter. I don't usually like to use anything disposable, but this method will help you avoid contaminating your glue with glitter and will let you collect any loose bits of glitter afterwards.

STEP 3
Using a paint brush, cover a section of your shoe with a thick layer of craft glue.Sprinkle loose glitter over that section. Shake it off. I have seen some tutorials where people mixed the glitter and the glue and then covered the shoe with the mixture, but it didn't work for me. The glitter got too lumpy and wouldn't spread.       

   
STEP 4
Repeat this process over the entire outer area on both shoes. Avoid the inside of the shoe (you don't want to feel glitter between your toes) and the heel. Leave to dry over night.

STEP 5
See if your shoes still need some coverage in places. Cover those sparsely glittered areas with more glue and glitter. Now with a paint brush cover the heels of the shoes with glitter glue. I prefer this to covering them with glitter as glitter glue gives a smoother shinier finish and you can avoid sending bits of glitter flying everywhere when you click your heels together. Leave to dry overnight.

STEP 6
Cover the entire outer area of the shoes with glitter glue. This will help keep any loose glitter in place. Give the heels another layer of glitter glue. Leave to dry.

STEP 7
In the meantime, make the bows. Cut your ribbons into two strips, approximately 6cm each. Using needle and thread make them into bows. With the glue gun, attach smaller rhinestones all over the bows. Aim for as much coverage as you can get gluing the rhinestones close to each other and making sure to put some in every nook and cranny. Attach a larger rhinestone to the middle of the bow with the glue gun.

I took these pictures after a full night of partying, so some of the rhinestones were lost on the dance floor 

STEP 8
Once the glue on your shoes is completely dry, give them a nice even spritz with the hair spray. I had a real problem with loose glitter, so I had to spray them four times before I was confident that I would not leave a glitter trail behind me as I walk.

STEP 9
Once your shoes are completely dry and no loose glitter is left behind when you shake them, attach the bows to the front of the shoes with the glue gun.

Now put on a pair of bobby socks and you're ready to follow the yellow brick road!